Revive Your Deck. No Teardown Required.
MitchellGroup is Central Ohio’s exclusive installer of composite deck covers by Valsaga. ReviveDeck is a patent-pending composite deck cover that transforms your existing deck in a fraction of the time and cost of a full replacement.
What Are Composite Deck Covers?
ReviveDeck by Valsaga is a patent-pending, semi-flexible composite deck cover engineered to install directly over your existing wood or composite deck boards. At just under half an inch thick, these precision-cut covers snap over standard 2×6 boards, instantly concealing years of wear, fading, and weather damage.
Made from durable wood-plastic composite (WPC) with built-in UV protection, ReviveDeck delivers the look and feel of a brand-new deck without the cost, waste, or disruption of a full teardown and rebuild.
Your Only Source for Professional ReviveDeck Installation
MitchellGroup is the exclusive authorized installer of Valsaga ReviveDeck in Central Ohio. This product is not available through big-box retailers or general contractors. When you work with us, you get direct access to the product, factory-trained installation expertise, and the full protection of Valsaga’s 10-year residential warranty.
Why Homeowners Choose Composite Deck Covers
No Teardown Needed
ReviveDeck installs directly over your existing deck boards. No demolition, no hauling old lumber to the landfill, and no rebuilding from scratch.
Fraction of the Cost
Save significantly compared to a full deck replacement. ReviveDeck covers what you have instead of replacing it, cutting both material and labor costs.
Low Maintenance
No more annual sanding, staining, or sealing. The composite material resists fading, splintering, and warping so your deck looks great year after year.
Built-In UV Protection
Engineered with UV-resistant materials that stand up to direct sunlight without fading, cracking, or breaking down over time.
10-Year Warranty
Backed by Valsaga’s 10-year limited residential warranty covering splitting, splintering, rot, and structural damage from fungal decay or termites.
Eco-Friendly Materials
Made from recycled wood-plastic composite. By covering instead of replacing, you also keep your old deck out of the landfill.
How Composite Deck Cover Installation Works
- Inspection – We assess your existing deck to confirm it is structurally sound. Any loose, warped, or deteriorated boards are secured or replaced to create a solid foundation.
- Surface Preparation – The deck is thoroughly cleaned to remove dirt, mold, and mildew. Any necessary structural repairs are completed before we begin.
- Precision Measurement – We measure the full deck area and create a layout plan that accounts for patterns, edges, and any special conditions unique to your space.
- Overlay Installation – ReviveDeck composite deck covers are positioned over the existing boards according to the layout plan and fastened with stainless steel screws at every contact point.
- Edge Finishing – Pre-cut trim boards cover any uneven or exposed edges, eliminating trip hazards and giving the deck a clean, finished look.
- Final Walkthrough – We inspect every section with you to confirm proper alignment, secure fastening, and a smooth, safe surface throughout.
Available Colors
ReviveDeck composite deck covers are available in five warm, natural tones designed to complement a range of outdoor settings:
- Honey Latte – Warm golden tan with soft honey undertones
- Soft Caramel – Golden-honey hue with cozy, natural warmth
- Ashy Brew – Sleek grey inspired by lightly brewed coffee
- Mocha Elegance – Rich browns with soft, luxurious neutrals
- Latte Mocha – Deep mocha brown with a smooth, warm finish
Composite Deck Cover Specifications
| Material | Wood-Plastic Composite (WPC) |
| Board Length | 6 ft |
| Board Width | 5.52 in (nominal 6 in) |
| Thickness | 0.39 in (approx. 10mm) |
| Approximate Weight | 7 lb per board |
| Fits Over | Standard 2×6 deck boards (wood or composite) |
| Edge Type | Square |
| UV Protection | Yes, built-in |
| Fastener Type | Stainless steel outdoor deck screws |
| Warranty | 10-year limited residential (non-transferable) |
| Patent Status | Patent Pending |
Frequently Asked Questions About Composite Deck Covers
Can ReviveDeck be installed over any existing deck?
ReviveDeck is designed for structurally sound wood or composite decks with standard 2×6 boards. During our inspection, we check for stability and make any needed repairs before installation begins.
How long does installation take?
Most residential decks can be completed in one to two days, depending on size and condition. Because there is no teardown involved, the timeline is significantly shorter than a traditional deck replacement.
Will it look like a real deck or an obvious cover?
ReviveDeck has a natural wood-grain texture and sits flush on the boards. Once the edge trim is in place, the finished result looks like a completely new composite deck.
What maintenance does it require?
Virtually none. The composite material does not need staining, sealing, or sanding. Occasional cleaning with soap and water is all it takes to keep it looking its best.
Is this product available at hardware stores?
No. ReviveDeck is not sold through retail channels. MitchellGroup is the exclusive authorized installer, which means you get professional installation and full warranty support that is not available elsewhere.
What does the warranty cover?
Valsaga provides a 10-year limited residential warranty that covers defects such as splitting, splintering, rot, and structural damage from fungal decay or termites. The warranty is non-transferable and applies to the original purchaser at the original installation address.
Ready to revive your deck? Contact MitchellGroup to learn more about our deck services and composite decks in Central Ohio.
